SWC-I型—輕型十字軸式萬向聯軸器 結構形式 Designs
A型—可伸縮焊接型 Type A - Welded shaft design with length compensation
B型—無伸縮焊接型 Type A - Welded shaft design without length compensation
C型—無伸縮單元結構短型 Type C - Short l flanged design without length compensation
法蘭螺栓孔布置 Flange bolthole patterns
表1:SWC-I型萬向聯軸器的基本參數與主要尺寸
Data and Sizes of SWC-I Series Universal Joint Couplings
型式 |
項目item | SWC-I | SWC-I | SWC-I | SWC-I | SWC-I | SWC-I | SWC-I | SWC-I | |
A型 | L | 430 | 430 | 480 | 500 | 550 | 650 | 800 | 860 | |
Lv | 40 | 45 | 55 | 80 | 80 | 80 | 100 | 120 | ||
m(kg) | 7 | 8 | 10 | 15 | 25 | 40 | 76 | 100 | ||
B型 | L | 200 | 240 | 260 | 295 | 370 | 430 | 530 | 600 | |
m(kg) | 4.8 | 5.7 | 7.7 | 12 | 20 | 32 | 58 | 80 | ||
C型 | L | 294 | 288 | 264 | 296 | 312 | 368 | 508 | 464 | |
m(kg) | 6 | 7 | 8.5 | 13 | 22 | 35 | 63 | 88 | ||
Tn(N.m) | 800 | 800 | 1200 | 2300 | 4500 | 8400 | 16000 | 22000 | ||
Tf(N.m) | 400 | 400 | 600 | 1150 | 2250 | 4200 | 8000 | 11000 | ||
β(°) | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | ||
D | 95 | 95 | 112 | 119 | 139 | 156 | 183 | 200 | ||
Df | 75 | 90 | 100 | 120 | 150 | 180 | 200 | 225 | ||
D1 | 62 | 74.5 | 84 | 102 | 130 | 155.5 | 170 | 196 | ||
D2(H9) | 42 | 47 | 57 | 75 | 90 | 110 | 125 | 140 | ||
D3 | 50 | 50 | 63.5 | 76 | 89 | 89 | 120 | 140 | ||
Lm | 58.5 | 57 | 50 | 56.5 | 58.5 | 66 | 100 | 82 | ||
k | 10 | 10 | 10 | 10 | 10 | 16 | 17 | 18 | ||
t | 2 | 2.5 | 2.5 | 2.5 | 3 | 4 | 4 | 5 | ||
n | 6 | 4 | 6 | 8 | 8 | 8 | 8 | 8 | ||
d | 6.5 | 8.5 | 8.5 | 11 | 13 | 15 | 17 | 17 | ||
mL(kg) | 0.30 | 0.30 | 0.38 | 0.45 | 1.0 | 1.0 | 1.7 | 2.0 | ||
法蘭螺栓 | 規格 size | M6 | M8 | M8 | M10 | M12 | M14 | M16 | M16 | |
擰緊力矩(N.m) | 13 | 32 | 32 | 64 | 110 | 180 | 270 | 270 |
注: 1.上表中各代號含義如下: 1.Notations
L—標準長度,對可伸縮型而言,長度L系縮短狀態 L=Standard length,or compressed length for
下的最小長度; designs with length compensation;
Lv—伸長量; Lv=Length compensation;
m—質量; m=Weight;
Tn—工稱轉矩; Tn=Nominal torque;
Tf—疲勞轉矩,即在交變負荷作用下按疲勞強度確 Tf=Fatigue torque,i,e,permissible torque as
定的許用轉矩; determined according to the fatigue strength
Under reversing loads;
β—軸線折角; β=Maximum deflection angle;
mL—增長100mm的質量; mL=weight per 100mm tube
2. 上表中未注明計量單位者按毫米計; 2.Millimeters are used as measurement units
except where noted;
3. 用戶需要改變標準長度、伸縮量和法蘭型式尺 3.Please consult us for customizations regarding
寸時,請和我廠商定。 length,length compensation and flange connections;
標記示例 Example